Home

P1010663

Submitted by Webmaster on Sun, 01/14/2007 - 18:03. 2007 January
» add new comment | 2007 January image gallery | previous image | next image

Comment viewing options

Select your preferred way to display the comments and click 'Save settings' to activate your changes.

Dual rotating locking plates.

Submitted by Al Crandall on Fri, 01/19/2007 - 00:41.
The two locking plates can be aligned with the bed slot and then the steady can be added to the lathe without removing the tailstock or banjo. Then the locking bolts are twisted by hand to swing the plates into lock position and the nuts are tightened.
» reply to this comment