Home

P1010655

Submitted by Webmaster on Sun, 01/14/2007 - 18:03. 2007 January
» add new comment | 2007 January image gallery | previous image | next image

Comment viewing options

Select your preferred way to display the comments and click 'Save settings' to activate your changes.

Deep hollowing captured system for 24" lathe

Submitted by Al Crandall on Mon, 01/15/2007 - 14:42.
This shop made system uses a 1" diameter boring bar which telescopes out from the frame. The laser pointer arm is shown in storage position. It would be rotated 180* and positioned over the cutter when in use.

Al Crandall
» reply to this comment